75  kg - Olives  per hour press             

 

The 75 Kg per hour press is divided into 2 components. the first being the malaxer, hammer mill , feeder unit. The second is the press.

Also supplied with the set is a second press cage complete with catch tray and matt set and a transfer trolley jack unit 

 

                                                                 

              malaxer / hammer mill / feeder unit                         inside the malaxer

 

The olives are tipped into the top hopper where a small auger transfers them into the hammer mill at a controlled rate.

The hammer mill design is a hybrid of the two styles we have previously manufactured, using the best features of each. The hammer mill assembly can be slid on rails to fill either the left or right malaxer compartment.

                                           

The feed hopper can be tipped clear of the grinder to allow easy access for cleaning.

The Malaxer is split into 2 separate compartments, this is the same as having 2 Malaxers ensuring a efficient supply of malaxed olive paste to the press.

The press cage is placed under the malaxer and the gate opened loading the cage.  the cage is loaded in the usual way with matts specially made by AQUARIUS. 2 cage assemblies are supplied with this machine again to maintain a efficient flow of paste to the press.

When the cage has been loaded it is transferred to the press using the lift trolley.

The press is a semi automatic unit . A air over hydraulic power pack provides the pressure. press speed can be adjusted to suit the conditions. Once the press has been set to run the operator can leave it and concentrate on other parts of the process.

                                     

When the fluids have been collected the oil can then be separated from the fluid , see separator.

Key Benefits

Pricing excludes GST - NZ Dollars

Description  

Price

75 Kg per hour press system   NZ$ 24,750 plus GST

Note: This machine comes with 2 press cages, 2 press collection trays , 2 sets of nylon mats, and a lift trolley to transfer the press cage from malaxer to the press.

Contact Information

        Sales and  Customer Support:

  Peter Hopperus

Telephone:

+64  9 828 6809

Mobile:

+64 027 475 8795

Fax:

+64 9 828 68001

Postal Address:

PO Box 83 051

 Edmonton 

 Auckland 

New Zealand

Email:

peter@axisindustrial.co.nz